Comtac Cluey KM LR - LoRaWAN IoT Monitor & Controller

868MHz Class A / C LoRaWAN, 8xDI + 4xDI

The Cluey is a smart controller designed for monitoring and control tasks in electricity, water or other infrastructure networks. Built in a robust housing with IP65 protection and designed to suit a wide range of use cases and applications.

Select a configuration that suits your application, wire the device accordingly and set your individual parameters. With the controller and monitoring intelligence already present in the Cluey, no need for complex programming.

Save battery by only transmitting when necessary; the Cluey uses clever signal processing allowing for threshold monitoring and other logical operations to support event driven and efficient radio transmission. This reduces uneccessary transmissions to a minimum for increased operational lifetime.

For added flexibility the Cluey can be either battery powered, with a lifetime of up to 10+ years, or powered by 24VDC for continous operation acting as a Class C device. As a Class C device, you have much better possibilities for downlink allowing you to use Cluey for more active remote control applications. If Cluey is normally powered by mains, the battery is used for backup in the event of power failure.

LoRaWAN based radio tranmission ensures long range, robust wireless communications.

Key Features

4-8 x Digital Inputs

• Adjustable annunciating delau, debounced, defluttering
• Modes of signalling: Interval, Rising-/falling edge
• NC or NO - software selectable
• Can be used as counter (Class A: Min 2Hz, Class C: Min 10Hz) - 24bit register

4 x Digital outputs

• Share terminals with 4 inputs.
• Can be operated as static, ON / OFF or as wiper outputs controlled by downlink
• Can be triggered by local internal events in the Cluey

- Event triggered and/or time synchronized cyclic transmission

- Time-stamped events and transmissions

- Operating power: Battery or 24VDC external

- IP65 enclosure with DIN-rail mouting

- Life sign messaging containig device and battery status

- Internal antenna with option for external antenna if necessary

Typical Applications

Cluey KM is especially designed for the acquisition of short circuit and earth fault alarms in transformer stations, but has a wide range of potential applications, such as;

• Valve, Switch or Fuse status monitoring
• Property Access Supervision; Connect to motion detector, or reed switch for doors and windows
• Pulse Counting for meter reading
• Operating time counting for motors, pumps, ventilators and other machinery
• Supervision of gates, valves, doors, bollards
• Slider valves control and monitoring
• Tap changer position monitoring and control
• Street light control