Westermo BRD-355A ADSL/VDSL, 2xETH, 1xRS232, 1xRJ11 DSL

Westermo BRD-355A

ADSL/VDSL, 2xETH, 1xRS232, 1xRJ11 DSL

Varenr: 118747
Alt. varenr: BRD-355A
Logg inn eller registrer deg for å se priser.

Westermo BRD-355A - Industrial DSL Router

ASDL/VSDL, 2 x ETH, 1 x RS232, 1 x RJ11 DSL

 

Remote access removes boundaries, eliminates the need for time consuming site visits and provides a network infrastructure suitable for today’s ”always on”-society. The BRD-355 industrial ADSL/VDSL router uses the Internet to connect remote networks. Allowing IP enabled SCADA, HMI, PLCs, sensors or legacy serial devices etc. to communicate with each other, a prerequisite for any Industrial Internet (IIoT/IoT) solution.

The BRD-355 has a built-in two port Ethernet switch and an RS-232-port, for both new and legacy modem replacement. Designed to be installed on a DIN rail all connectors and LEDs have been positioned on the front of the unit, for easy access and fast status feedback.

The cybersecurity features of the BRD-355 prevent unauthorized access and secure the communication for Internet-enabled applications. The easy-to-use firewall filters incoming and outgoing traffic, allowing only approved packets to pass through. The BRD supports a variety of VPN technologies to ensure that data can be sent over public or private networks securely via SSL (OpenVPN) or IPsec. The BRD-355 is fully integrated with the easy to use, Westermo WeConnect high security remote access solution.

Upgrading legacy serial or modem systems to IP-enabled, can prove both costly and time consuming. Therefore the BRD-355 includes a wide set of feature to allow the easy migration of the legacy serial/modem applications. The features include interpreting the ATD modem emulation, lease line over IP and multidrop application where a master is connected to multiple slave locations.

 

Features

Industrial remote access using the Internet

  • Fixed-line broadband connection via ADSL or VDSL2
  • Access SCADA systems, HMI, sensors and PLCs remotely
  • Support for ADSL Annex J and VDSL2 vectoring

Designed for industrial applications

  • 35mm DIN-rail mounting
  • Wide power input range, 10 to 60 VDC
  • Wide operating temperature range (-25 to +70°C)
  • High MTBF MIL-217F 955.000 hours

Secured resilient Internet access

  • Cybersecurity toolbox including firewall, DoS prevention
  • Full integration with WeConnect Remote access solution

Legacy Serial to IP support

  • Replacement for analogue leased lines modems
  • Serial protocols to IP conversion